HPC-G27&LCD GSM900MHZ MOBILE PHONE SIGNAL BOOSTER SPECIFICATIONS AND DETAILS

Description

A signal booster or cell phone repeater is a device used for boosting the cell phone network to the local area by the usage of a reception antenna. In simple words, wireless signal booster is a device to boost the wireless signal and this device make wireless coverage more and more.

Wireless repeaters are practical, beautiful and easy to install.Wireless repeaters are designed to meet the needs and requirements of modern citizens. Wireless repeaters come complete with everything necessary for a full cell phone repeater system enabling you to use your cell phone wherever you are.

One of the most popular applications of a wireless signal repeater is its use in buildings which are signal isolated. When a house is located too far from the telecom station, which is usually installed around a city, cell phone signal can be very low.

Overview 

HPC-G27&LCD Single band repeater is to support any two mobile band existing in the world to help end users to improve mobile signals for much better phone call quality and smoother data transmission. It is designed to support coverage area max can up to 2000 square meters with proper engineering. Below are the main features. 

1. The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.
2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance. 
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals. 
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators. 

5.Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance. 

6.Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.

7.Supports up to (500) users / calls simultaneously. 

8.Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

Installation steps 

• Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest. 
• Step 2 Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later. 
• Step 3 Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater. 
• Step 4 Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna. 
• Step 5 Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later. More notes on Indoor antennas and patterns here. 
• Step 6 Connect coaxial cable between the Indoor antenna and the Signal Repeater output port. 
• Step 7 Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible. 
• Step 8 Secure all antennas and cables, securely mount the Signal repeater and clean up the installation.

See Datasheet