-0%

APC Smart-UPS C 1000VA 1KVA LCD 230V

Original price was: KSh 71,737.00.Current price is: KSh 71,437.00. excl. VAT

Output power capacity : 600Watts / 1.0kVA
Output Connections : (8) IEC 320 C13 (Battery Backup), (2) IEC Jumpers (Battery Backup)
Nominal Output Voltage : 230V
Nominal Input Voltage : 230V
Input Connections : IEC-320 C14

Buy online at Best price in Nairobi Kenya

Visit our store and enjoy:

Genuine, brand new, sealed stock
Price-match against authorized dealers
Installation & configuration services available
Expert advice on compatibility with your network

SKU: HB2530 Categories: APC Smart UPS, APC UPS Store Kenya Brand: APC

Description
Reviews (0)

APC Smart-UPS C 1000VA LCD 230V(SMC1000IC) description

Overview

APC Smart-UPS C 1000VA 1KVA LCD 230V

Cold-start capable

Provides temporary battery power when the utility power is out.
Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency

Reduces utlility costs, generates less heat.
LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Marketing Features

Smarter productivity with ability to tailor to your specific application needs

Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data safe and available

Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems
Save time with easy and convenient remote accessibility

Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.

Smart-UPS Features & Benefits

Manageability

Network manageable

Provides remote power management of the UPS over the network.
Disconnected battery notification

Warns when a battery is not available to provide backup power.
Serial connectivity

Provides management of the UPS via a serial port.
USB connectivity

Provides management of the UPS via a USB port (not available on all models).
Audible alarms

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
LED status indicators

Quickly understand unit and power status with visual indicators.

Serviceability

User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Resettable circuit breakers

Enables a quick recovery from overload events.
Predictive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.
Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability

Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Availability

Disconnected battery notification

Warns when a battery is not available to provide backup power.
Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.
Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Max Configurable Power (Watts)

600Watts / 1.0kVA

Output Voltage Distortion

Less than 5%

Output Frequency (sync to mains)

50/60Hz +/- 3 Hz

Other Output Voltages

220, 240

Topology

Line Interactive

Waveform type

Sine wave

Transfer Time

6ms typical : 10ms maximum

Input frequency

50/60 Hz +/- 3 Hz (auto sensing)

Input voltage range for main operations

180 – 287V

Input voltage adjustable range for mains operation

170 – 300V

Other Input Voltages

220, 240

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time

3hour(s)

Expected Battery Life (years)

3 – 5

RBC Quantity

Battery Charge Power (Watts)

72Watts

Battery Volt-Amp-Hour Capacity

216

Interface Port(s)

RJ-45 Serial, USB

Control panel

Multi-function LCD status and control console

Audible Alarm

Alarm when on battery : distinctive low battery alarm : configurable delays

Emergency Power Off (EPO)

—

Surge energy rating

455Joules

Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Maximum Height

219MM, 21.9CM

Maximum Width

171MM, 17.1CM

Maximum Depth

439MM, 43.9CM

Net Weight

17.27KG

Shipping weight

19.55KG

Shipping Height

376MM, 37.6CM

Shipping Width

328MM, 32.8CM

Shipping Depth

595MM, 59.5CM

Color

Black

Master Carton Units

1.0

Units per Pallet

18.0

Operating Temperature

0 – 40 °C

Operating Relative Humidity

0 – 95 %

Operating Elevation

0-3000meters

Storage Temperature

-15 – 45 °C

Storage Relative Humidity

0 – 95 %

Storage Elevation

0-15000meters

Audible noise at 1 meter from surface of unit

41.0dBA

Online thermal dissipation

100.0BTU/hr

Approvals

CE, CSA, GOST, UL 1778, VDE

Standard warranty

2 years repair or replace

APC Smart-UPS C 1000VA LCD 230V with SmartConnect

Reviews

There are no reviews yet.

Be the first to review “APC Smart-UPS C 1000VA 1KVA LCD 230V” Cancel reply

You must be logged in to post a review.