Asenware AW-CFP2166-2 fire Alarm panel
Original price was: KSh 28,000.00.KSh 27,000.00Current price is: KSh 27,000.00. excl. VAT
KEY FEATURES
- Available Options: 2–4 Zone and 6-8 Zone
- Access levels to enter the panel
- Outputs for Alarm devices: Includes 2 bells/fire relay/ fault relay
Buy Online at Best Prices in Nairobi Kenya
ASENWARE AW-CFP2166-2 FIRE ALARM PANEL SPECIFICATIONS AND DETAILS
Overview
The AW-CFP2166 series 2 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
Highlights
- Maximum number of Analogue Conventional Detector Inputs: 20 detectors each zone
- Auxiliary resettable power output: 24VDC/ 100mA limiting protection
- Automatic power switchover: mains power and secondary power (from batteries)
- Independent functional buttons with indication: User friendly interface for easy operation and recognition
- Fault supervision and notification: inputs, outputs, system, power, earth, fuse
- Disablement: zones disablement 10.Evacuation: Fire drills to simulate fire alarm condition on panel
- Silence: sounders and buzzer silence 12.Walk test: indicators check
Technical Specification
| AC INPUT | 220VAC 50/60Hz | +10% |
| -15% | ||
| DC OUTPUT | 24VDC typical | |
| Voltage for MCU | 5V for MCU | |
| Current at 24VDC from PSE | 450mA standby current | |
| Maximum current from PSE | 1A except batteries charge | |
| Batteries current | 1.85A maximum, current limited | |
| Auxiliary output | 24VDC +/- 10%, 100 mA max, current limited, monitored | |
| Batteries | 2*12V/ 2.3Ah sealed lead acid gel, self-regulated * | |
| Battery low-voltage protection | 21V | |
| Detectors connection allowed each zone | 20 (except MCPs) | |
| Zone alarm current | 6mA minimum/ 27mA maximum | |
| Sounder output | 2*0.75A maximum | |
| Fire Relay | 1A/30VDC maximum | |
| Fault Relay | 1A/30VDC maximum | |
| Communication protocol | 2 wires RS485 bus system | |
| EOL resistor for zone | 6.8K 1W | |
| EOL resistor for outputs | 6.8K 1W | |
| Fuse for AC Power | 1 A/ 250V glass tube fuse 5 X 20mm | |
| Fuse on DC Power | 1A/ 250V glass tube fuse 5 X 20mm | |
| Environmental | Class A temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing | |
| Terminal blocks rating | All terminals rated for 12 to18 AWG (0.75 to 2.5 mm2) | |
Also see;
High Tensile Galvanized HT Wire 1.6mm
1 review for Asenware AW-CFP2166-2 fire Alarm panel
Add a review
You must be logged in to post a review.
Related products
Asenware Alarm
Victor Rono –
Asenware AW-CFP2166-2 fire Alarm panel very accurate