Mercury 6KVA UPS, 6000KVA Online UPS Specifications and details
Get the Mercury 6kva Online UPS (Uninteruptible Power Supply) to provide power backup for your sensitive equipment. The Mercury online UPS is ideal for sensitive equipment like servers, network systems, other IT equipment and similar devices.
When zero tolerance for any break in power supply is imperative due to the sensitivity of the application, the online UPS is what you need.
And for that perfect balance between top performance, reliability and budget-friendly pricing, the Mercury online UPS range has an outstanding rating. With the Mercury 6kva online UPS, you get that high-rated performance from a 4200W capacity UPS.
With a rated capacity of 4200W, the Mercury 6KVA online UPS can support multiple office devices. It will deliver up to 20 minutes power backup at half load and some 7 minutes backup at full load. Powered by 20x 8.2AH 12Vbattery, the Mercury 6KVA online UPS meets the backup requirement for most small office appliances.
The advanced design of the Mercury online UPS range gives them the performance edge that you expect. Here’s more on the features you will expect from the Mercury 6KVA Online UPS:
- Application: Small network, servers and other IT equipment
- High frequency and double conversion on-line technology
- Fully digitized microprocessor control
- Wide input voltage range
- UPS startup without battery
- Cold start
- Advanced battery management
- Advanced battery charge in UPS off mode
- Lightning and surge protection
- Short circuit and surge protection
- Fan speed auto control when loads varies
- Optional extension battery pack
- Load capacity display
- Smart RS232 communication with monitoring software
- Optional SNMP Card slot
Specifications
Power | 6KVA / 4200W |
Voltage range | 176 ±5VAC~276 ±5VAC |
Frequency | 46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto sensing |
Input phase | Single phase |
Power factor | ≥0.98 |
Voltage range | 220VAC ±1% |
Output phase | Single phase |
Frequency | 50Hz ±0.2% (battery mode) |
THD | < 2% (Linear load); < 6% (non-Linear load) |
Overload | 105%~130% 10min turn to Bypass mode, > 130% 1s turn to Bypass mode |
Crest factor | 3:1 (max) |
Waveform | Pure sine wave |
Transfer time | 0ms (AC mode – Battery mode) 0ms (AC mode – Bypass mode) |
Efficiency | ≥88% |
AC mode | 5 cycles turn off inverter, no transfer to Bypass, provide alarm. |
Battery mode | 5 cycles turn off inverter, provide alarm. |
Bypass mode | Input fuse blown or break action. |
Battery Model | 12V sealed lead acid maintenance free |
DC voltage | 240VDC |
Configuration | 20x 12V/8.2AH |
Backup time | 20min (half load) / 7min (full load) |
Charge current | 1A (standard unit) / 5A (long time unit) |
Recharge time | 90% capacity after 8hrs charging |
Communication Interface | RS232; SNMP (optional) |
Parallel Port | Parallel availability for redundancy and load sharing up to three unit |
LCD Indication | Input voltage/frequency; battery voltage; output voltage/frequency; load watt/VA value & percent; inverter temperature; operation mode such as “on batt” or “on bypass” |
LED Indication | Green: normal operation; Yellow: warning condition Red: abnormal operation |
Noise level | ≤ 55dB |
Temperature | 0~40˚C; 0 ~ 40˚C (storage temperature) |
Humidity | 0~95% (non-condensing) |
Altitude | < 1500m |
Weight Net/Gross | 89/104kg (standard unit); 34/48kg (long time unit) |
Dimension (WxDxH) | 270 x 570 x 720mm |
Packaging (WxDxH) | 370 x 670 x 940mm |
Reviews
There are no reviews yet.