Fanvil PA2 SIP Paging Gateway Specifications And Details

Overview

PA2 is a SIP video intercom and paging device for industry applications. The media stream transmission adopts standard IP/RTP/RTSP protocol. It inherits the advantages of the stability and the sound quality of the FANVIL VOIP Phone. It is perfectly compatible with all the current SIP IPPBX /IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, etc. It has various functions and interfaces, Such as Intercom, broadcast, video, security, and recording, to adapt to different application environments, you can very easily DIY your video intercom & paging equipment. PA2 is the best choice for everyone.

Tech Specification

Intercom

• Two SIP lines, supporting SIP 2.0
• (RFC3261) and related RFC
• Supports two lines RTSP
• Voice broadcast IP address
• Button or remote volume adjustment
• Switch signal input and output
• Talkback recording output
• Handsfree talking
• Default auto answer
• Dynamic multicast function
• Supports DC or POE power supply
• Support for Function key interface
• Support monophonic active speakers
• Network time synchronization
• Action URL / Active URI remote control

Audio Features

• Narrowband speech codec: G.711a / u, G.723.1, G.726-32K, G.729AB
• Broadband speech codec: G.722
• Full Duplex Echo Cancellation (AEC)
• DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info

Networking & Protocols

• Support PoE (802.3af)
• Primary and secondary DNS servers are supported
• Support VLAN
• Support SNTP client
• Support VPN L2TP / PPTP / IPSec
• It Supports SRTP
• Support HTTP / HTTPS web pages
•  has Support Qos: 802.1p / q, DSCP
• Support MD5 authentication
• Support Web Filter
• DHCP / static / PPPoE
• Support STUN

 Physical Specifications

• 2 RJ45 interface: Yellow: WAN port 10 / 100M adaptive, support POE
  PoE: 802.3af (Class 3: 6.49 ~ 12.95W)
  Black: LAN port (Only connected to the original camera)
  Cable: Super five lines or better
• 1 blue indicator (SIP status andnetwork status)
• 2 volume plus or minus key
• 1 restore factory settings key
• 1 recording output interface: 3.5mm standard audio interface 15 Ohm impedance
• 1 ground screw
• 1 way passive speaker interface: Output power: 4Ω, POE / 10W, 12V /10W,18V / 20W, 24V / 30W; related tosupply voltage. Wire diameter: 18 AWG or larger diameter
  Interface:Pluggable terminal block
• 1 headset speaker：
• Output: 32 Ohm 1.2V
  interface:Pluggable terminal block
• 1 DSS key interface (4 lines):
  Indicator: Output 5.0V 5mA
  Interface:pluggable terminal block

Additional Specs

• 1 way microphone input interface: Recommendation: Use an electret condenser microphone
  Sensitivity: -38dB, Impedance 2.2 K
  Ohm bias voltage 2.2V
  Interface:Pluggable terminal block
• 1 short circuit input and output
  interface (built-in relay): Relay: MAX DC30V / 1A, AC125V /
  0.5A, Interface:pluggable terminal block
• 2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm
  DC power seat 1 road way 2Pin
  pluggable terminal block
• Standby power consumption: DC12V
  1.32W / POE 1.78W
• Housing material: aluminum alloy shell
• Installation: Indoor installation  Operating temperature: -30 ~ 70 ℃
• Storage temperature: -40 ~ 70 ℃
• Relative humidity: 10% – 95%
• Equipment size: 113x83x28mm
• Packing size: 138x108x77mm
• Equipment weight: 250g

See Datasheet