Fanvil PA2S SIP Paging Gateway

Fanvil PA2S is a SIP paging gateway that uses the standard IP/RTP/RTSP protocol for media streaming. It sets a variety of functional interfaces in one: broadcast, recording, intercom, security.

Through the connection of the external devices to achieve audio and video intercom, broadcast, security trigger and other practical functions, Fanvil PA2S can apply to multiple scenarios to deploy the equipment. The size of the device is small, which is suitable for DIY applications of various integrated solutions.

• Offices
• Prisons
• Care Homes

The PA2 has various functions and interfaces such as intercom, broadcast, video, security, recording.

Fanvil PA2 SIP paging gateway Technical Specification

Intercom

• Two SIP lines, supporting SIP 2.0 (RFC3261) and related RFC
• Supports two lines RTSP
• Voice broadcast IP address
• Button or remote volume adjustment
• Switch signal input and output
• Talkback recording output
• Handsfree talking
• Default auto answer
• Dynamic multicast function
• Supports DC or POE power supply
• Support for Function key interface
• Support monophonic active speakers
• Network time synchronization
• Action URL / Active URI remote control
• Supports SRTP
• Support for HTTP / HTTPS web pages
• Support Qos: 802.1p / q, DSCP
• Support MD5 authentication
• Supports Web Filter
• DHCP / static / PPPoE
• STUN

Physical Specifications

• 2 RJ45 interface: Yellow: WAN port 10 / 100M adaptive, support POE PoE: 802.3af (Class 3: 6.49 ~ 12.95W) Black: LAN port (Only connected to the original camera) Cable: Super five lines or better
• 1 blue indicator (SIP status and network status)
• 2 volume plus or minus key
• 1 restore factory settings key
• 1 recording output interface: 3.5mm standard audio interface 15 Ohm impedance
• 1 ground screw
• 1 way passive speaker interface: Output power: 4Ω, POE / 10W, 12V / 10W,18V / 20W, 24V / 30W; related to supply voltage. Wire diameter: 18 AWG or larger diameter, Interface:Pluggable terminal block
• 1 headset speaker： Output: 32 Ohm 1.2V interface:Pluggable terminal block
• 1 DSS key interface (4 lines): Indicator: Output 5.0V 5mA Interface:pluggable terminal block
• 1 way microphone input interface: Recommendation: Use an electret condenser microphone Sensitivity: -38dB, Impedance 2.2 K Ohm bias voltage 2.2V Interface:Pluggable terminal block
• 1 short circuit input and output interface (built-in relay): Relay: MAX DC30V / 1A, AC125V / 0.5A, Interface:pluggable terminal block
• 2 parallel power input interface: 12V-24V / 2A DC 1 road for the 5.5mm DC power seat 1 road way 2Pin pluggable terminal block
• Standby power consumption: DC12V 1.32W / POE 1.78W
• Housing material: aluminum alloy shell
• Installation: Indoor installation
• Operating temperature: -30 ~ 70 ℃
• Storage temperature: -40 ~ 70 ℃
• Relative humidity: 10% – 95%
• Equipment size: 113x83x28mm
• Packing size: 138x108x77mm
• Equipment weight: 250g

Audio

• Narrowband speech coding: G.711a / u, G.723.1, G.726-32K, G.729AB
• Broadband speech coding: G.722
• Half Duplex Echo Cancellation (AEC)
• DTMF: In-band, out-of-band DTMF (RFC2833) / SIP Info

Networking Protocols

• Supports PoE (802.3af
• Primary and secondary DNS servers are supported
• Support VLAN
• Supports SNTP client
• Support VPN L2TP / PPTP / IPSec