-9%

Hikvision DS-3E1106P-EI/M 4-Port Smart PoE Switch

Original price was: KSh 5,500.00.Current price is: KSh 5,000.00. excl. VAT

4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port
Total PoE Power Budget 45 W
Support 1Q VLAN
Support PoE watchdog to detect and restart the cameras that do not respond
Support STP/RSTP loop prevention
Support cable detection to locate failure
Up to 300 m Long Range PoE Transmission
6 kV Surge Protection

SKU: HB40076 Categories: Hikvision Store Kenya, Hikvision Switches Brand: Hikvision

Description
Reviews (0)

Hikvision DS-3E1106P-EI/M 4-Port Fast Ethernet Smart PoE Switch

The Hikvision DS-3E1106P-EI/M is a 4-port Fast Ethernet Smart PoE (Power over Ethernet) switch designed to provide efficient network connectivity and power supply for devices such as IP cameras, wireless access points, and VoIP phones. This switch is particularly suitable for small to medium-sized surveillance systems and network setups.

Specifications

Model		DS-3E1106P-EI/M
Network Parameters	Ports	4 × 10/100 Mbps PoE port,2 × 10/100 Mbps RJ45 port
	MAC Address Table	2 K
	Switching Capacity	14 Gbps
	Packet Forwarding Rate	10.42 Mpps
	Internal Cache	1 Mbits
PoE Power Supply	PoE Standard	IEEE 802.3af,IEEE 802.3at
	PoE Power Pin	End-span: 1/2(-), 3/6(+)
	PoE Port	PoE: Ports 1 to 4
	Max. Port Power	30 W
	PoE Power Budget	45 W
Software Function	Long Range	Ports 1 to 4: up to 300 m.Long range performance may vary depend on camera model or cable condition.
	VIP Port	Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidthresources are insufficient.
	Port Isolation	Ports 1 to 4: port isolation mode to improve network securityPorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
	PoE Watchdog	Ports 1 to 4: auto detect and restart the cameras that do not respond.
	Link Aggregation	Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.Support static link aggregation. Support 2 aggregation groups.
	Loop Prevention	Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP. Suppport 802.1w RSTP.
	VLAN	VLAN is used for network scale planning and network health improvement. Support 802.1Q.Configurable VLAN ID from 1-4094. It Support Trunk, Access port mode. Support Max. 32 VLAN.
	HPP	Support one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
	System Maintenance	Support device management via web.Support DHCP Client. Enabled by default for dynamic assignment of management

Software function		IP addresses.Support Super IP, which is a fixed IP address (10.180.190.200) for direct access. Support management via Hik-Central Pro. *Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating.
General	Shell	Metal material
	Net Weight	0.27 kg (0.6 lb)
	Gross Weight	0.77 kg (1.7 lb)
	Dimensions (W × H × D)	121.1 mm × 27.6 mm × 83.1 mm (4.77” × 1.09” × 3.27”)
	Operating Temperature	0 °C to 40 °C (32 °F to 104 °F)
	Storage Temperature	-40 °C to 85 °C (-40 °F to 185 °F)
	Operating Humidity	5% to 95% (no condensation)
	Relative Humidity	5% to 95% (no condensation)
	Power Supply	54 V DC, 0.92 A
	Installation Mode	Desk-Mounted,Wall-Mounted
	Max. Power Consumption	50 W
	Power Consumption in Idle	1.8 W
	Surge Protection	6 kV
Approval	EMC	CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3:2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
	Safety	CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN62368-1: 2014+A11: 2017)
	Chemistry	Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS(2011/65/EU)