Hikvision DS-3E1526P-SI Smart Managed Gigabit PoE Switch
The Hikvision DS-3E1526P-SI is a 24-port Smart Managed Gigabit PoE+ switch designed for professional IP surveillance deployments and enterprise networks. Smart managed switches are developed by Hikvision, featuring easy management and maintenance.
You can easily deploy, monitor and expand your video security system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance
Specification
General | |
Shell | Metal material |
Net Weight | 2.975 kg (6.56 lb) |
Gross Weight | 3.535 kg (7.79 lb) |
Dimensions (W × H × D) | 440.00 mm × 44.00 mm × 221.00 mm (17.32” × 1.73” × 8.70”) |
Operating Temperature | 0 °C to 45 °C (0 °F to 113 °F) |
Storage Temperature | -40 °C to 85 °C (-40 °F to 185 °F) |
Operating Humidity | 5% to 95% (no condensation) |
Relative Humidity | 5% to 95% (no condensation) |
Power Supply | 100 to 240 V AC, 50/60 Hz, Max. 6.3 A |
Installation Mode | Rack (equipped with mounting ears) |
Max. Power Consumption | 400 W |
Power Consumption in Idle | 30 W |
Surge Protection | 6 kV |
Network Parameters |
|
Ports | 24 × Gigabit PoE port,2 × Gigabit fiber optical port |
MAC Address Table | 8 K |
Switching Capacity | 56 Gbps |
Packet Forwarding Rate | 41.66 Mpps |
Internal Cache | 4.1 Mbits |
PoE Power Supply | |
PoE Standard | IEEE 802.3af,IEEE 802.3at |
PoE Power Pin | End-span: 1/2(+), 3/6(-); |
PoE Port | PoE: Ports 1 to 24 |
Max. Port Power | 30 W |
PoE Power Budget | 370 W |
Software Function |
|
Long Range | Ports 1 to 24: up to 300 m.Long range performance may vary depend on camera model or cable condition. |
Port Isolation | Ports 1 to 24: port isolation mode to improve network security.Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
PoE Watchdog | Ports 1 to 24: auto detect and restart the cameras that do not respond. |
Link Aggregation | Link aggregation combines multiple physical ports into a single logical port to achieve load balancing, expand bandwidth, and protect ports. The system supports static link aggregation.
Support 8 aggregation groups. |
QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.Support port-based priority configuration.
Support SP, WRR priority schedule mode. |
Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.Support 802.1D STP. |
VLAN |
VLAN is used for network scale planning and network health improvement. Support 802.1Q.Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode. Support Max. 4094 VLAN. |
HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:1. Display the port rate.
2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device. |
System Maintenance | Remote upgrade, default parameters recovery, logs viewing, basic networkparameters configuration, import and export configuration, time sync |
Port Rate-Limiting | Port rate-limiting is used for port bandwidth adjustment to prevent networkcongestion. |
Storm Control | Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.Support port rate limiting based on broadcast, multicast, and unknown unicast
packets. |
Approval |
|
EMC |
FCC (47 CFR Part 15, Subpart B);CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN
50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015) |
Safety | UL (UL 60950-1);CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1:
2014+A11: 2017) |
Chemistry | CE-RoHS (201165EU); WEEE (201219EU);Reach (Regulation (EC) No.19072006) |
Reviews
There are no reviews yet.