Hikvision DS-K2210 Elevator Master Controller
The Hikvision DS-K2210 is an Elevator Master Controller designed for access control integration with elevators, enabling floor-by-floor authorization in buildings. It enhances security by restricting elevator access to authorized users (via cards, PINs, or biometrics).
The elevator controller contains master elevator controller and distributed elevator controller. It can be applied to buildings, public areas and so on. DS-K2210 master elevator controller supports up to 128 floors’ permissions.
It also supports TCP/IP communication. The system also supports RS-485 communication with the distributed elevator controller, the card reader, the video intercom devices, and other equipment. You can also control the device by the web client, iVMS-4200 client software etc.
Key Features:
- Connectable with up to 2 Wiegand card readers or RS-485 card readers
- Connectable with up to 3 groups of distributed elevator controllers (DS-K2M0016A). Each group is connectable with up to 8 distributed elevator controllers (DS-K2M0016A)
- Supports 3 types of relays: Button, Call Elevator and Auto Button
- Up to 128 floors’ permissions can be controlled
- Supports adding 20,000 normal cards and saving 50,000 events
- Supports uploading events, saving offline events
- Save the data when powering off
- Get the floor No. through permission management to control the corresponding relays
- Supports up to 256 schedule template. Each schedule template supports up to 1 week plan and 4 holiday groups
- Supports 5 input terminals and 5 output terminals
- Event input and output
- Multiple authentication modes: Card, Fingerprint, Card and Fingerprint, Card and Password, Employee ID and Password, Super Password and Duress Code.
- Remote control via the web client and the iVMS-4200 client software
- Supports NTP time synchronization, manually time synchronization, auto time synchronization.
- Watchdog and Tamper-proof function
Specification
System | |
Processor | 32 bit |
Network | |
Communication protocol | TCP/IP |
Interface | |
Alarm input | 1 Panic Button; 1 Fire Alarm Button; 1 MaintenanceButton |
Alarm output | 4 Relay Outputs |
RS-485 | 2 |
Wiegand | 2 |
General | |
 Â
 Indicator |
Power On: Solid Green,Running Properly: Flashing Green,Running Exception: Solid Red,Serial Port Not Communicating: Off,Serial Port Communicating: Solid Green,Relay NC: Off,Relay NO: Solid Green,Network Disconnected: Off,Network Cable Connected: Solid Yellow, Flashing Green,Network Armed: Solid Yellow,Flashing Green, |
Power supply | 12 VDC±15% |
Working temperature | -40°F to 158°F |
Working humidity | 0% to 90% (No Condensation) |
Dimensions | 167(L)mm*105(W)mm*30(H)mm |
Installation | Guide Rail Installation |
Reviews
There are no reviews yet.