-4%

Ruijie Reyee RG-AP180P-L Wi-Fi 6 Wall Plate Access Point

Original price was: KSh 24,000.00.Current price is: KSh 23,000.00. excl. VAT

Flat Rear Panel, Easy Installation on Any Wall in All Countries
2.5 Gbps Uplink Port, Achieving Ultra-High Speed Access in Rooms
PoE Out for IP Phones and Other IoT Devices
2.976 Gbps High Speed with 160 MHz Band
Ruijie cloud management, intelligent optimization

SKU: HB36268 Categories: Ruijie Reyee, Ruijie Reyee Access Points

Description
Reviews (0)

Ruijie Reyee RG-AP180P-L Wi-Fi 6 Dual-Radio Wall Plate Access Point

The Reyee RG-AP180P-L is a dual-radio 802.11ax-compliant Wi-Fi 6 wireless access point (AP) provided by Ruijie Networks for general education, higher education, government, finance, business, and other indoor high- density scenarios. It adopts 802.11ax and supports 2.4 GHz and 5 GHz frequency bands. It can provide an access rate of up to 2.976 Gbps. The ultra-fast wireless rate eliminates the bottleneck of performance.

Wi-Fi Radio

Wi-Fi Radio	Reyee RG-AP180P-L
	Dual-radio and up to four spatial streams:Radio 1: 2.4 GHz, two spatial streams, 2×2 MU-MIMO Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO
	Radio 1, 802.11b/g/n/ax:2.400 GHz to 2.4835 GHz (HE20/HE40), ISM, channels 1 to 13 Radio 2, 802.11a/n/ac/ax: 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 5.725 GHz to 5.850 GHz (HE80), U-NII-3/ISM, channels 149, 153, 157, 161, and 165 Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.
	Combined peak data rate: 2.976 Gbps Radio 1: 2.4 GHz, 574 MbpsTwo spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum) Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical) Radio 2: 5 GHz, 2.402 Gbps Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (maximum) Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)
	The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio 802.11b: 1, 2, 5.5, 11 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) 802.11ac: 6.5 to 1,732 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT160) 802.11ax: 8.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)
	802.11n/ac/ax: A-MPDU and A-MSDU
	Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas)
	2.4 GHz: 5 dBi 5 GHz: 5 dBi
	2.4 GHz radio: 20 dBm (17 dBm per chain) 5 GHz radio: 20 dBm (17 dBm per chain)Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance. Thailand 2.400 GHz to 2.4835 GHz, EIRP £ 20 dBm 5.150 GHz to 5.350 GHz, EIRP £ 23 dBm 5.470 GHz to 5.725 GHz. EIRP £ 30 dBm 5.725 GHz to 5.825 GHz, EIRP £ 30 dBm

Wi-Fi Radio	RG-AP180P-L
Power increment	Configurable in increments of 1 dBm
Radio technologies	802.11b: Direct-Sequence Spread-Spectrum (DSSS)802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)
Modulation types	802.11b: BPSK, QPSK, CCK802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Power Supply and Consumption

Power Supply and Consumption	RG-AP180P-L
	The AP supports the following two power supply modes:48 V DC/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately. PoE input over PoE-in port: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+). Note: When powered by 802.3at (PoE+), the AP operates with the optimal performance. If both DC power and PoE are available, DC power is preferred.
	LAN 1 supports 48 V/10 W PoE output to an attached device.
	Maximum power consumption: 25 W DC powered: 25 WPoE powered (802.3af): 15 W PoE+ powered (802.3at): 25 W Idle mode: 8 W

Routing and Switching

Routing and Switching	RG-AP180P-L
	Static IPv4 address and DHCP-assigned IPv4 address
	Multicast-to-unicast conversion
	IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping IPv6 DHCP Client
	IPv4/IPv6 static routing
	PPPoE client IPsec VPN