Ruijie Reyee RG-AP810-L AX1800 Wi-Fi 6 Indoor Access Point
Ruijie Reyee RG-AP810-L is a cost-effective entry-level wireless access point (AP) with Wi-Fi 6 dual-radio design. It is easy and flexible for small- and medium- sized enterprises, and its features, functionality, and performance can be extended for large-sized enterprise network deployments.
Ruijie RG-AP810-L supports a maximum wireless throughput of 1.201 Gbps in 5 GHz radio mode (HE80) with 80 MHz bandwidth, and the actual aggregated data rate reaches 1.775 Gbps (HE80/HE40). It fully complies with Wi- Fi 6 features, and ensures minimal signal interference.
Hardware Specifications
Dimensions and Weight
Dimensions and Weight | RG-AP810-L |
220 mm x 220 mm x 49 mm (8.66 in. x 8.66 in. x 1.93 in.) | |
514 mm x 326 mm x 294 mm (20.24 in. x 12.83 in. x 11.57 in.) | |
Device: 0.6 kg (1.33 lbs)Mounting bracket: 0.2 kg (0.44 lbs) | |
8.45 kg (18.63 lbs) | |
Wall/Ceiling-mount (A mounting bracket is delivered with the main unit) | |
Kensington lock and securing latch |
Wi-Fi Radio
Wi-Fi Radio | Reyee RG-AP810-L |
 Radio design | Dual-radioRadio 1: 2.4 GHz, two spatial streams, 2×2 MU-MIMO Radio 2: 5 GHz, two spatial streams, 2×2 MU-MIMO |
 Â
 Operating frequencies |
Radio 1, 802.11b/g/n/ax:2.400 GHz to 2.4835 GHz, ISM Radio 2, 802.11a/n/ac/ax:
5.150 GHz to 5.250 GHz, U-NII-1 5.250 GHz to 5.350 GHz, U-NII-2A 5.470 GHz to 5.725 GHz, U-NII-2C 5.725 GHz to 5.850 GHz, U-NII-3/ISM Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance |
 Â
 Data rates |
Combined peak data rate: 1.775 Gbps2.4 GHz radio, 574 Mbps
Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum) Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical) 5 GHz radio, 1.201 Gbps Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to 2SS HE80 802.11ax client devices (typical) |
 Â
  Data rate set |
The following 802.11-compliant data rates in Mbps are supported:2.4 GHz radio 802.11b: 1, 2, 5.5, 11
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24 ,36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT80) 802.11ax: 8.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80) |
Packet aggregation |
802.11n/ac/ax: A-MPDU and A-MSDU |
Antenna type | Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas) |
Antenna gain | 2.4 GHz: 2 dBi 5 GHz: 4 dBi |
 Â
 Maximum transmit power |
2.4 GHz radio: 26 dBm (23 dBm per chain) 5 GHz radio: 26 dBm (23 dBm per chain)Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.
Thailand 2.400 GHz to 2.4835 GHz, EIRP £ 20 dBm 5.150 GHz to 5.350 GHz, EIRP £ 23 dBm 5.470 GHz to 5.725 GHz. EIRP £ 30 dBm 5.725 GHz to 5.825 GHz, EIRP £ 30 dBm |
Power increment | Configurable based on requirement |
 Radio technologies | 802.11b: Direct-Sequence Spread-Spectrum (DSSS)802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA) |
 Modulation types | 802.11b: BPSK, QPSK, CCK802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM |
Ports Specifications
Ports Specifications | RG-AP810-L |
1 x 10/100/1000BASE-T portIn compliance with IEEE 802.3af standard (PoE) Auto MDI/MDIX crossover
PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher) 802.3az EEE |
|
1 x RJ45 console port (serial console port) | |
1 x multi-color system status LED | |
1 x Reset buttonPress the button for shorter than 2 seconds. Then the device restarts.
Press the button for longer than 5 seconds. Then the device restores to factory settings. |
Power supply and consumption
Power Supply and Consumption | RG-AP810-L |
 Â
Input power supply |
The AP supports the following two power supply modes:48 V DC/0.3 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.
PoE input over PoE-in port: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE). Note: If both DC power and PoE are available, DC power is preferred. |
 Â
Overall power consumption |
Maximum power consumption: 12.95 W DC powered: 12.95 WPoE powered (802.3af): 12.95 W PoE+ powered (802.3at): 12.95 W PoE++ powered (802.3bt): 12.95 W Idle mode: 6 W |
Security
Security and Authentication | RG-AP810-L |
Remote Authentication Dial-In User Service (RADIUS)PSK, web, 802.1X, PEAP, WPA, WPA2, and WPA3 authentication
SMS authentication (used with the RG-WS series wireless access controller) MAB authentication (used with the RG-WS series wireless access controller) WEP (64/128 bits), WPA-Personal, WPA-Enterprise, WPA2-Personal, WPA2-Enterprise, WPA3-Personal (WPA2/WPA3 transition mode), WPA3-Enterprise (CCMP), WPA3-OWE |
|
Allowlist, static blocklist, and dynamic blocklist | |
Dynamic ACL assignmentACL assignment based on time spans
ACL assignment (complete entry) based on MAC addresses Execution of pre-configured ACLs (entry index) based on MAC addresses |
|
Supported | |
Supported |
Routing and switching
Routing and Switching | RG-AP810-L |
Static IPv4 address and DHCP-assigned IPv4 address DHCP Snooping, Option 82, DHCP Server, DHCP Client | |
Multicast-to-unicast conversion | |
IPv6 addressing, Neighbor Discovery (ND), ICMPv6, IPv6 Ping IPv6 DHCP Client | |
IPv4/IPv6 static routing | |
PPPoE ClientIPsec VPN, up to five IPsec tunnels |
Reviews
There are no reviews yet.