Cambium Networks Gigabit Ethernet Surge Suppressor 56V
Cambium Networks designs outdoor wireless broadband solutions to operate in the toughest of environments. Lightning strikes are the most typical cause of system outages or failures of mast-mounted equipment especially when mounted as high as 300m. The Gigabit Ethernet Surge Suppressor is critical for lightning protection to
minimize the potential for damage.
Network operators should always follow best-practices for grounding and lightning protection. Doing so will minimize network outages and reduce the associated costs of tower climbs and equipment repair/replacement.
The Gigabit Ethernet Surge Suppressor is compatible with the PMP 450i (Access Point and Subscriber Module), PTP 450i and PTP 820S. The unit ships suitable for mounting to a wall or pole.
Specifications and Features | |
Model Number | C000000L033A |
Transfer Rate | 1000 Base T |
Connectors | Two RJ-45 cables. Note: All RJ45 Ethernet LAN cables used for providing power or are connected to power ports (PoE) must be UL certified with VW-1 markings. All cables for outdoor installations must be suitable for the environment and have the appropriate rating. |
Nominal Voltage | 56 V |
Protection Mode | Line-to-line and line-to-ground |
Surge Arrestor | TVS Diodes (Transient Voltage Suppression for longer operational life) |
Surge Current Rating, L-G , Total | 172A, 10/1000us |
Response Time | 5 nanoseconds typical |
Mounting | Pole mount or wall mount |
Dimensions | 118 x 87.5 x 46.5 mm (4.6 x 3.4 x 1.8 in) |
Weight | 156 g (0.34 lbs) |
Wind Survival | 321 kph (200 mph) |
Operating Temperature | -40ºC to 60ºC (-40ºF to 140ºF) |
Humidity | 100% Condensing |
Environmental Protection | IP54 – Note: This product meets the UL/cUL 62368 / IEC 62368 edition 2 specification. The radio housings feature a raintight design. |
Reviews
There are no reviews yet.